LS1001, LS1002, LS1061 & LS1062 LED LIGHT STRIP Lohuis Flasher LED lighting strips are useful for all decorative lighting applications. The long life of the LED’s (100,000 hours or greater) assures your lighting will not have unsightly gaps caused by burnt out lamps. Along with the energy savings and bright, vivid colors generated by the LEDs, these light strips will greatly enhance many lighting applications. The light strips are available in a single LED row (LS1001) or dual row model (LS1002), which provides twice the light output. Both strips are available in 12" or 6" lengths and they simply plug together. With no gaps in the spacing of LEDs these strips create a smooth, even wash of light. The LS models can be mounted in our polycarbonate tube or fitted to your custom application. Contact sales and marketing personnel for tips on custom installations of this product. Use Lohuis-Flasher solid-state fuse, distribution PCB for ease of cabling when using an external 24V power supply. Contact Distributor or factory for custom color options not listed here.

Lohuis Flasher LED lighting strips are useful for all decorative lighting where conventional incandescent strip lighting is used. Long life of the LED's 100,000 hours or greater assures your lighting will not have unsightly gaps caused from failed bulbs. Along with this energy savings and bright cheerful colors generated by the LED's, they also will benefit your lighting application. Contact your distributor or sales and marketing personnel for tips on custom installations of this product, or for options not listed here.

The LS1001 and LS1002 Light Strips These light strips are available in single LED row (the model 1001) or dual row (model 1002, shown), which provides twice the light output. The sections simply plug together with no gaps in the spacing to give an effect of one long strip and can be mounted in our polycarbonate tube or fit your custom application. Use Boca-Flasher solid state fuse, distribution PCB for ease of cabling when using an external 24V power supply. Options include mixing every other LED color or mixing every three LED colors. Examples are Red and Green or Red White and Blue repeating patterns.

The CCS100 LIGHT STRIP The CCS100 Light Strip has Red, Green, and Blue LED triads that are spaced 1.00” apart to create a splash lighting effect of one continuous color-changing lamp. Long life of LED’s 100,000 plus hours assures your lighting will not have unsightly gaps caused from failed bulbs. The sections simply plug together with no gaps in the LED spacing to give an effect of one long strip and can be mounted in our polycarbonate tube or fit your custom application. Drivers for this light strip include the use of low cost analog drivers and color switching circuits, PLC’s, Boca Flasher’s colorwash controllers CW 12/200, 3/30, and our Boca Flasher’s microprocessor based DMX controller, the DMX 12/200. The DMX-12/200 can control up to 200 strips and run 12 independent DMX channels. Contact sales and marketing personnel for tips on custom installations of this product. Our unique MOSFET current source driver circuits are both analog 0-5V and PWM 0-5V. They are 100% compatible with the LED drive, power matched so they can’t be over-driven. The circuits also match brightness output per strip regardless of cable voltage drop.

The CCS106 LIGHT STRIP The CCS106 Light Strip is a shorter version of the CCS100. When runs require a 6" shorter length, the CCS106 can be utilized. The sections simply plug together with no gaps in the LED spacing to give an effect of one long strip and can be mounted in our polycarbonate tube or fit your custom application. LED’s Red, Green and Blue triads are spaced 1.00" apart to create a splash lighting effect of one continuous color-changing lamp. Drivers for this light strip include the use of low cost analog drivers and color switching circuits, PLC’s, Boca-Flashers color wash controllers CW 12/200, CW 3/30, and Boca Flasher’s micro-processor based DMX controller, the DMX 12/200. The DMX-12/200 can control up to 200 strips and run 12 independent DMX channels. Contact sales and marketing personnel for tips on custom installations of this product. Our unique MOSFET current source driver circuits are both analog 0-5V and PWM 0-5V. They are 100% compatible with the LED drive, power matched so they can’t be over-driven. The circuits also match brightness output per strip regardless of cable voltage drop.