CityBeam IP54

An extremely efficient optic system, a high IP RATE and endless possibilities of usage are the main features of the CityBeam, a projector conceived with the same metal outlook as the CityColor although completely different in the optic. The sliding system of the optic, controlled by stepper motors, has been studied to have the lamp MSD 1200W generating a luminous beam cone with an opening angle varying from 15° to 20°.
The CityBeam can cover a surface of about 130 m2 by keeping the lighting values higher than 300 lux over a distance of 50 mts. When using the cover without diffusion filter/flood (accessory available upon request) the angle opening can vary between 8° and 11°, covering a surface of about 150 m2 over a distance of 100 mts and with lighting values higher than 160 lux.
The models that are presently in production differ in the electronics and IP RATE, 33 or 54, which make the CityBeam very suitable for outdoor use in bad weather conditions too. The model with highest IP RATE (cod. 0004) is equipped with a very intuitive control setting: special options are displayed on the menu, in order to show the hours that either the fixture and the lamp have been working for.
The cooling system is controlled by a microprocessor, and together with the control circuits and the thermal switch guarantee a perfect working temperature and very little maintenance: often the only service to make is the lamp replacement only (after about 2.000 hrs).
For particular needs, the use of the CityBeam can be combined to the CityColor, which is its ideal complementary: when working together these two fixtures can cover either big surfaces over medium and small distances, and also over greater distances with a narrow light beam.
Fifteen programmes are already stored in the memory of the fixtures which can therefore be used also without remote controllers and in synchro mode with Master/Slave setting.
It is also possible to make a custom use of the CityBeam through the DMX connection, by using a remote controller to create any kind of color games.

Available versions:
art. 9901     CityBeam IP RATE 33 MSD 1200W
art. 0004     CityBeam IP RATE 54 MSD 1200W
art. 0007     CityBeam 1200W IP Touring with separate ballast (for indoor use only)
art. 0203     CityBeam 1800W IP RATE 54 MSR-SA 1800W

Available accessories:
art. 9901/a    No frost cover for CityBeam
art. 0002/a    XLR 3 Pin male connettors IP 55
art. 0002/b    XLR 3 Pin female connettors IP 55

Un' ottica estremamente efficiente, un IP RATE molto alto ed infinite possibilità di utilizzo sono le caratteristiche principali del CityBeam. Progettato sulla struttura meccanica del CityColor se ne differenzia completamente per la parte ottica. Una meccanica scorrevole, controllata da motori passo-passo e microprocessori, consente alla lampada, una MSD Philips da 1200W, di generare un cono luminoso con un' apertura angolare variabile fra 15° e 20°.
Il CityBeam riesce a coprire una superficie di 130 m2 con un livello di illuminazione superiore a 300 lux alla distanza di 50 metri. Utilizzando il coperchio senza diffusore flood (accessorio disponibile a richiesta) l' apertura angolare può variare fra 8° e 11° consentendo al faro di coprire una superficie di circa 150 m2 alla distanza di 100 metri con un livello di illuminazione ancora superiore a 160 lux.
I modelli attualmente in produzione si differenziano fra loro per le caratteristiche costruttive e per l' elettronica di controllo. Le due versioni hanno un IP RATE di 33 o 54 , entrambi per ambiente esterno in condizioni ambientali anche particolarmente avverse. Il modello con IP RATE più elevato (cod. 0004) ha un modulo di controllo e configurazione dall' uso molto intuitivo. Apposite opzioni presenti nel menu di gestione visualizzano sia le ore di utilizzo della lampada sia quelle del faro consentendone una gestione corretta e completa.
Il sistema di raffreddamento, controllato da apposito microprocessore, i circuiti di controllo ed i sensori termici garantiscono sia la temperatura di funzionamento ottimale in ogni condizione sia ridottissimi interventi di manutenzione che in pratica si riducono unicamente alla sostituzione della lampada ogni 2000 ore.
Per esigenze particolari il CityBeam può essere utilizzato unitamente al CityColor che ha caratteristiche complementari. I due fari utilizzati contemporaneamente possono coprire sia grandi superfici a medie e piccole distanze sia distanze maggiori con un cono luminoso più stretto.
Nel CityBeam sono memorizzati 15 programmi studiati appositamente per creare degli effetti gradevoli nelle più disparate condizioni di utilizzo e consentono un utilizzo sincrono di più unità configurate in modalità master/slave.
Le connessioni DMX presenti sul CityBeam ne rendono anche possibile la completa gestione tramite centralina di controllo e la programmazione di effetti luce personalizzati.

Versioni disponibili:
art. 9901    CityBeam IP RATE 33 MSD 1200W
art. 0004    CityBeam IP RATE 54 MSD 1200W
art. 0007    CityBeam 1200W Touring con ballast separato (solo per uso interno)
art. 0203    CityBeam 1800W IP RATE 54 MSR-SA 1800W

Accessori disponibili:
art. 9901/a Coperchio senza diffusore flood
art. 0002/a Connettori XLR 3 Pin maschio IP 55
art. 0002/b Connettori XLR 3 Pin femmina IP 55

LAMP
(art. 9901 - 0004 - 0007)
MSD 1200W PHILIPS (92.000 flux/lm)
2000 hours lamp life
6000 K color temperature

(art. 0203)
MSR-SA 1800W PHILIPS (144.000 flux/lm)
750 hours lamp life
6000 K color temperature

BEAM ANGLE (50% intensity)
(art. 9901 - 0004 - 0007)
8°-11° without diffusor
15°-20° with diffusor

(art. 0203)
5°-8°

REMOTE OR LOCAL CONTINUOUS VARIATION
BETWEEN MINIMUM AND MAXIMUM ANGLE

CYM COLOR MIXING
Full CYM color mixing with high resolution stepper motors

DIMMER
Mechanical dimmer 0-100%

SHUTTER

IR RATE
IP 33 (art. 9901)
IP 54 (art. 0004 - 0203)
Indoor use only (art. 0004)

POWER SUPPLY (art. 9901 - 0004 - 0007)
rated voltage 230Vac
rated frequency 50 or 60 Hz
rated current 7A
rated power 1600W
    (available on request version: 208Vac 60 Hz)

POWER SUPPLY (art. 0203)
rated voltage 230Vac
rated frequency 50 or 60 Hz
rated current 10A
rated power 2000W
    (available on request version: 208Vac 60 Hz)

DMX CHANNELS
ch1 = motors speed
ch2 = cyan
ch3 = yellow
ch4 = magenta
ch5 = dimmer
ch6 = beam angle
ch7 = remote reset /lamp off

DIMENSIONS
(packing box) WxDxH 90x60x76

WEIGHT
art. 9901 50 kgs net
art. 0004 49 kgs net
art. 0203 54 kgs net

MiniCity 250

The new product of the "architectural" family of the Studio Due fixtures is the new MiniCity 250 has an intermediate position between the MiniCity150 and the great series of the CityBeam and of the CityColor. The fixture uses the tested CYM colorchanger system, patent pending, developed by our labs and a new optic system with an opening angle, which can be varied, driven by two stepper motors. With a new mechanical structure, a new internal cooling system and with a new circuit with displays to program the fixture, it was possible to guarantee an IP rate of 66; in this way it is possible to use the fixture in all environments both indoors and outdoors. Twentyeight programs are already stored in the fixture and it can therefore be used also without remote controllers and in synchro mode with Master/ Slave setting.It is also possible to personalise the use of the fixture through the DMX connection, by using a standard remote controller. Further characteristics of the fixture makes it possible to dimmer and to switch-off the lamp by a remote controller; in this way the fixture is suitable for live performances (for example theatre).

Technical features

•Lamp

HERCULES 600m



Technical features

•Lamp

DMX listing DMX CHANNEL FUNCTIONS 1 MOTOR SPEED 2 CYAN 3 YELLOW 4 MAGENTA 5 DIMMER 6 BASIC COLOURS/RAINBOW 7 REMOTE RESET

CITYCOLOR 400 Technical features •Lamp 2 x Discharge MasterColour CDM-T 150W/830 or CDM-T 150W/942 (PHILIPS) Color temperature: 3.000° K (CDM-T 150W/830) or 4.200°K (CDM-T 150W/942) Average lamp life: 6.000 hours Luminous flux: 2 x 14.000 lm Burning position: Universal   •OPTIC COLOUR SYSTEM Full CYM color mixing, unlimited variety of colours and shades High resolution stepper motors   •BEAM ANGLE Beam angle (50%): 45°   •IP RATE IP 66   •control input Standard interface: RS-485; opto-couplet input Protocol: USITT DMX 512   •AUTOMODE Stand-alone control: auto mode function master/slave (synchro mode) with 30 programs •power supply Rated voltage: 230V/50Hz-230V/60Hz Rated power: 500Va Rated current: 2,42A (230V)   •FUSES Lamp fuse: 5.0A/250V (delay time) Electronic fuse: 2.0A/250V (delay time)   •DIMENSION (WxDxH max) mm 480x490x740   •WEIGHT Kgs. 31,0

Technical features

•Lamp